A direct drive turntable from Technics with a coreless motor, a three-layered brass and aluminium platter, a magnesium tonearm and a four-layered cabinet. This is the SL-1200G in silver.
THIS IS AN OPEN BOX PRODUCT AND MAY HAVE SOME COSMETIC BLEMISHES, PHOTOS COMING SOON, HOWEVER WE WILL SEND PHOTOS TO YOU BEFORE SHIPPING TO CONFIRM WITH YOU. normal warranty applies
Technics describes the SL-1200G as a direct drive turntable system. It plays 33-1/3, 45 and 78 rpm records and has a pitch adjust range of ±8 % and ±16 %. A head shell and two auxiliary weights are supplied.
Why you will love it
Coreless direct drive motor
Technics says the SL-1200G uses a newly developed coreless direct drive motor with no iron core, which eliminates the rotation irregularity known as cogging. It says the twin-rotor construction reduces the bearing load while keeping high torque, and reduces minute vibration during rotation.

Motor control
Technics says the motor control technology was developed for Blu-ray devices, and that switching the drive mode depending on the operating state of the motor gives high starting torque and speed stability. It lists a build-up of 0.7 seconds from standstill to 33-1/3 rpm.
Three-layered platter
The platter combines brass and aluminium die-cast layers, with rubber over the whole rear surface to reduce resonance. Technics says the inertial mass is greater than the SP-10MK2 and more than twice that of the SL-1200MK5.
Balance adjustment
Technics says each turntable is balanced at the factory with specialised equipment after assembly. Units that have been adjusted carry a sticker reading BALANCED.
High-sensitivity tonearm
The universal static balance tonearm is made from lightweight magnesium. Technics says it uses its traditional gimbal suspension, with the horizontal and vertical rotation axes meeting at one central point, and high-precision bearings in a cut-processed housing.


Four-layered cabinet
A 10 mm thick hairline-finished aluminium top panel sits over the aluminium die-cast, BMC and heavyweight rubber layers used in the SL-1200MK5. Technics says the four layers give high rigidity with a high-quality finish and feel.
Terminals
Technics lists brass-milled, gold-plated phono and ground terminals, and metal shielding inside the case to reduce the effect of external noise.
Is it right for you?
A great fit if you…
- Want a direct drive turntable with a coreless motor and a heavy three-layered platter
- Already own, or plan to buy, a cartridge to fit the supplied head shell
- Play 33-1/3, 45 and 78 rpm records
- Have a phono input or a phono preamp
Worth knowing
- Technics lists a head shell and a screw set but no cartridge, so you need to choose and fit one
- The only audio output listed is PHONO (pin jack) plus an earth terminal, so connect it to a phono input or phono preamp
- It weighs approx. 18 kg and measures 453 x 173 x 372 mm, so check your shelf
- The cartridge mount is the JIS 12.7 mm (half inch) interval
Build your system
The SL-1200G has no cartridge and no built-in phono stage listed. These items are on our site.
- Cartridge: The Ortofon MC Cadenza Blue moving coil cartridge and Ortofon MC Cadenza Red moving coil cartridge weigh 10.7 g, within the 5.6 to 12.0 g range Technics gives without the auxiliary weight. Both need an MC phono stage
- Phono preamp: The Pro-Ject Phono Box S3 B phono preamplifier takes both MM and MC cartridges
- Phono preamp: The Pro-Ject Phono Box S2 phono preamplifier is an MM/MC phono preamplifier
- Amplifier: Browse our stereo amplifiers to complete the system
- Care: The Pro-Ject Clean it carbon fibre stylus brush and Pro-Ject Brush it carbon fibre record brush help keep the stylus and records clean
- Other turntables: The Technics SL-1210G direct drive turntable in black shares the same specification. Browse all turntables
Specifications
Turntable
| Type | Direct drive manual turntable |
|---|---|
| Speeds | 33-1/3, 45 and 78 rpm |
| Pitch adjust range | ±8 %, ±16 % |
| Starting torque | 3.3 kg-cm |
| Build-up | 0.7 s from standstill to 33-1/3 rpm |
| Wow and flutter | 0.025 % W.R.M.S. (JIS C5521) |
| Rumble | 78 dB (IEC 98A weighted) |
| Platter | Brass and aluminium die-cast, 332 mm, approx. 3.6 kg including rubber mat |
Tonearm
| Type | Universal static balance |
|---|---|
| Effective length | 230 mm |
| Overhang | 15 mm |
| Tracking error angle | Within 2° 32' (outer groove), within 0° 32' (inner groove), 30 cm record |
| Offset angle | 22° |
| Arm height adjustment | 0 to 6 mm |
| Stylus pressure adjustment | 0 to 4 g (direct reading) |
| Head shell weight | Approx. 7.6 g |
| Cartridge weight range, no auxiliary weight | 5.6 to 12.0 g (14.3 to 20.7 g with head shell) |
| With small auxiliary weight | 10.0 to 16.4 g (18.7 to 25.1 g with head shell) |
| With large auxiliary weight | 14.3 to 19.8 g (23.0 to 28.5 g with head shell) |
| Cartridge mounting | JIS 12.7 mm interval |
| Head shell terminal lug | 1.2 mm diameter 4-pin |
Connections and power
| Audio output | PHONO (pin jack), earth terminal |
|---|---|
| Power supply | AC 110 to 240 V, 50/60 Hz |
| Power consumption | 14 W approx., 0.2 W standby |
General
| Model | SL-1200GEG-S |
|---|---|
| Colour | Silver |
| Dimensions (W x H x D) | 453 x 173 x 372 mm |
| Weight | Approx. 18 kg |
Specifications from Technics (SL-1200GEG-S product page, technics.com Australia), checked November 2026.
What is in the box
- Turntable
- Turntable mat
- Dust cover
- EP record adaptor
- Balance weight
- Auxiliary weight, small
- Auxiliary weight, big
- Head shell
- Overhang gauge
- Screw set for cartridge
- PHONO cable
- PHONO earth lead
- AC mains lead
- Screw set for turntable
- Owner's manual
Questions people ask
Does the SL-1200G come with a cartridge?
Technics lists a head shell, screw set and overhang gauge, but no cartridge, among the accessories.
What speeds does it play?
33-1/3, 45 and 78 rpm, with a pitch adjust range of ±8 % and ±16 %.
Does it have a built-in phono preamp?
Technics lists a PHONO (pin jack) output and an earth terminal. Connect it to a phono input or a phono preamp.
What cartridge weights can the tonearm take?
5.6 to 12.0 g without the auxiliary weight, and up to 19.8 g with the large auxiliary weight, per Technics.