A stereo integrated amplifier from Rotel with 120 watts per channel of Class AB power into 8 ohms, balanced XLR and RCA inputs, an MM phono input, a Texas Instruments 32-bit/384kHz DAC, PC-USB with MQA and aptX and AAC Bluetooth. Available in Black or Silver.
Rotel says the RA-1572MKII uses an in-house manufactured, oversized toroidal transformer feeding a bank of 4 low ESR, T-Network slit-foil storage capacitors.
Why you will love it
Class AB power from a toroidal transformer
Rotel says the RA-1572MKII delivers 120 watts of Class AB output into 8 ohms. It describes the toroidal transformer's shape as helping prevent stray radiation patterns from corrupting audio signals in adjacent circuits.
Rotel lists 200 watts per channel maximum into 4 ohms (Non FTC) and 135 watts per channel into 4 ohms on the FTC rating. Total harmonic distortion is listed as below 0.018%.


Balanced, analogue, phono and digital inputs
Rotel lists analogue, digital, PC-USB with MQA, aptX and AAC Bluetooth, XLR balanced and Moving Magnet phono inputs.
Per the owner's manual, the CD, Tuner and Aux inputs are RCA line inputs, and the digital inputs are labelled 1 and 2 for coaxial and optical. It decodes PCM up to 24-bit/192kHz. The front USB input connects to an iPhone, iPad or iPod.
32-bit DAC and PC-USB
The DAC is a Texas Instruments 32-bit/384kHz converter with critically tuned output filter circuits.
PC-USB supports USB Audio Class 1.0 and Class 2.0, with MQA and MQA Studio listed up to 24-bit/384kHz. Per the manual, Windows needs no driver for Class 1.0 up to 96kHz. Class 2.0 up to 384kHz needs the Windows driver on the supplied USB stick. Macs do not need a driver. The RA-1572MKII is certified Roon Tested.


Outputs and control
The front panel has a status display, source and volume controls, Speaker A-B selection for Zone 2 and a 3.5mm headphone jack. Per the owner's manual, there are two mono subwoofer outputs and a pre-out.
Ethernet and RS232 connections are listed for control systems and software updates. Per the manual, tone controls are bypassed by default and can be switched on from the menu.
Is it right for you?
A great fit if you…
- Want a stereo amplifier with balanced XLR inputs as well as RCA
- Have a turntable with a Moving Magnet cartridge
- Want to stream from a phone or computer by Bluetooth or USB
- Want subwoofer outputs for a stereo system with a powered sub
Worth knowing
- It is a stereo amplifier for music sources, with no HDMI or built-in network streaming
- Phono input is Moving Magnet only
- USB Audio Class 2.0 playback (up to 384kHz) needs the Windows driver
- Per the manual, plugging in headphones does not mute the speakers, so use the A-B selector to turn them off
Build your system
Rotel lists XLR balanced, analogue, digital, PC-USB, Bluetooth and Moving Magnet phono sources for the RA-1572MKII.
- Speakers: Choose bookshelf speakers or floorstanding speakers
- Turntable: Plug in a turntable with a Moving Magnet cartridge. Browse turntables
- CD player: The Rotel RCD-1572MKII CD player has RCA and balanced XLR outputs. Browse more CD players
- Bass: Use the subwoofer outputs with a powered subwoofer
- More Rotel: See the Rotel range or compare other stereo amplifiers
Specifications
Power
| Continuous power output (Non FTC) | 120 W per channel (8 ohms) |
|---|---|
| Maximum power output (Non FTC) | 200 W per channel (4 ohms) |
| Power output (FTC) | 135 W per channel (4 ohms) |
| THD | Below 0.018% |
| IMD (60 Hz:7 kHz, 4:1) | Below 0.03% |
| Damping factor | 300 |
Inputs and outputs
| Line level frequency response | 10 Hz - 100 kHz, +/-0.5 dB |
|---|---|
| Phono frequency response | 20 Hz - 20 kHz, +/-0.5 dB |
| Digital input frequency response | 10 Hz - 90 kHz, +/-2 dB |
| Digital inputs | Coaxial and optical, LPCM up to 24-bit/192kHz |
| PC-USB | USB Audio Class 1, USB Audio Class 2 (up to 32-bit/384kHz, driver installation required), MQA and MQA Studio up to 24-bit/384kHz |
| Bluetooth | aptX and AAC |
| Pre-out level | 1.5 V |
| Input sensitivity | RCA 270 mV, XLR 440 mV, phono (MM) 2.1 mV |
| S/N ratio (IHF A-weighted) | Line 100 dB, digital 100 dB, phono 80 dB |
Physical and power
| Dimensions (W x H x D) | 431 x 144 x 358 mm |
|---|---|
| Front panel height | 3U / 132.6 mm |
| Net weight | 13.63 kg |
| Power requirements | 230 V, 50 Hz (Rotel Asia-Pacific page) |
| Power consumption | 400 W |
| Standby power | Below 0.5 W |
Specifications from Rotel's RA-1572MKII product pages (Asia-Pacific and global) and owner's manual, checked November 2026. FTC and Non FTC labels are Rotel's own. Power requirements are the Asia-Pacific figure.
What is in the box
- Rotel RA-1572MKII integrated amplifier
- RR-AX93 remote control with AAA batteries (per owner's manual)
- USB cable and USB stick with Windows driver (per owner's manual)
- Power cable
Questions people ask
Does it have balanced XLR inputs?
Yes. Rotel lists XLR balanced inputs. Do not connect both the RCA and XLR outputs of one source at the same time.
Does it have a phono input?
Yes. It has a Moving Magnet (MM) phono input. Rotel lists it as 2.1 mV sensitivity with 47k ohm input impedance.
Does it have Bluetooth?
Yes, with aptX and AAC support.
Can I connect a subwoofer?
Yes. There are two mono subwoofer outputs, which carry a summed left and right signal.
Can I connect my computer?
Yes, by the PC-USB input. Up to 24-bit/96kHz works with USB Audio Class 1.0 on Windows without a driver. For up to 384kHz, switch to Class 2.0 and install the Windows driver on the supplied USB stick.