A Class AB stereo power amplifier from Rotel rated at 350 watts per channel into 8 ohms and 648 watts per channel into 4 ohms. It has dual toroidal transformers, British-made slit foil capacitors, balanced XLR and RCA inputs and a 12 volt trigger. Black on this listing.
OPEN BOX PRODUCT Unit in great condition. Both channels replaced, brand new inside. Box has lots of tape, missing outer carton. Still packed securely. Includes power cord. Original packaging? Original packaging provided but damaged Accessories included? All normal accessories included and in as-new condition This item is provided with the full standard Rotel Australia-wide manufacturer warranty
Rotel says the RB-1590 is rated at 350 watts per channel into 8 ohms with both channels driven, aimed at larger listening rooms and less sensitive loudspeakers. It is a power amplifier, so it needs a preamplifier or other source with volume control.
Rotel on the RB-1590
Why you will love it
350 watts per channel, Class AB
Rotel lists 350 watts per channel into 8 ohms and 648 watts per channel into 4 ohms, with total harmonic distortion below 0.03% from 20 Hz to 20 kHz and a damping factor of 300.
Rotel says larger rooms or less sensitive loudspeakers need this kind of power to reach realistic dynamics.

Power supply and circuit layout
Rotel says the amplifier starts with twin toroidal transformers custom made by Rotel, with eight special British made BHC capacitors that have low loss and quick response.
Rotel says the circuit is laid out in a true monoblock design for maximum signal separation and improved stereo imaging, and that each component was selected after extensive listening sessions.
Inputs, protection and build
Inputs are balanced XLR and RCA. There are two pairs of 5-way speaker binding posts and a 12 volt trigger control, and a detachable IEC power cord.
Rotel lists thermal, overcurrent and over-voltage protection, and a dual staged power-on relay to reduce surge current and extend longevity. The chassis is 5U high and includes rack ears.

Is it right for you?
A great fit if you…
- Want a dedicated stereo power amplifier for a separate preamplifier
- Have a preamplifier with balanced XLR or RCA outputs
- Drive larger rooms or less sensitive speakers
- Want a 12 volt trigger for automatic switching
Worth knowing
- It is a power amplifier with no volume control, so it needs a preamplifier or other source with volume control
- Rotel lists a minimum speaker impedance of 4 ohms
- At 38.1 kg and 5U high, it needs a sturdy shelf or rack with room to breathe
- Power consumption is 800 W
Build your system
The RB-1590 takes a line-level signal from a preamplifier or processor by RCA or balanced XLR.
- Preamplifier: The Rotel RC-1590 stereo preamplifier was created to match this power amplifier
- Speakers: Add bookshelf speakers or floorstanding speakers
- Smaller Rotel power amplifier: The Rotel RB-1582 MkII stereo power amplifier is rated at 200 watts per channel into 8 ohms
- Other power amplifiers: Compare other power amplifiers
- Integrated amplifiers: If you would rather have one box, see stereo amplifiers
Specifications
Amplifier
| Power output | 350W/Ch (8 ohm); 648W/Ch (4 ohm) |
|---|---|
| THD (20 Hz - 20k Hz) | <0.03% |
| Intermodulation distortion | <0.03% |
| Frequency response | 10 Hz - 100k Hz, +/- 0.5 dB |
| S/N ratio (IHF A-weighted) | 120 dB |
| Damping factor | 300 |
| Speaker impedance | 4 ohm minimum |
| Gain | RCA 27.5 dB; XLR 23.5 dB |
| Channel separation | > 50 dB |
Inputs and outputs
| Line inputs | RCA (2.2 V / 12k ohm); XLR (3.5 V / 100k ohm) |
|---|---|
| Speaker outputs | 2 pairs of 5-way binding posts per channel |
| Control | 12V trigger |
Physical and power
| Dimensions (W x H x D) | 431 x 237 x 456 mm |
|---|---|
| Front panel height | 5U / 221 mm |
| Net weight | 38.1 kg |
| Power requirements | 230V, 50Hz |
| Power consumption | 800 W |
| Standby power consumption | 0.5 W |
| BTU rating (4 ohm, 1/8th power) | 2100 BTU/h |
Specifications from Rotel's RB-1590 product page (Asia-Pacific, 230V) and specification sheet, checked November 2026.
What is in the box
- Rotel RB-1590 stereo power amplifier
- Power cord
Questions people ask
How much power does it have?
Rotel lists 350 watts per channel into 8 ohms and 648 watts per channel into 4 ohms.
Does it have balanced inputs?
Yes. It has XLR balanced and RCA inputs.
Does it need a preamplifier?
Yes. It is a power amplifier. Connect it to a preamplifier or other source with volume control.
Can it be switched on by another component?
Rotel lists 12 volt trigger control.
Which preamplifier matches it?
Rotel created the RC-1590 stereo preamplifier to match the RB-1590.