A belt-drive turntable from Pro-Ject with a 9" carbon/aluminium tonearm, a 2 kg acrylic platter and Pro-Ject's True Balanced connection, with both a 5-pin mini XLR and an RCA phono output. This listing is fitted with an Ortofon Quintet Red moving-coil cartridge.
OPEN BOX PRODUCT Brand new with chip to front edge. Original packaging? Good - may have extra labels and tape, but no damage Accessories included? All normal accessories included and in as-new condition This item is provided with the full standard Pro-Ject Australia-wide manufacturer warranty
Pro-Ject calls the X2 B one of the first turntables with a fully balanced mini XLR output. The X2 B won an EISA award for best vinyl system when paired with the Phono Box S3 B, and Pro-Ject builds it in Europe.
This listing is White.
Why you will love it
True Balanced connection
Balanced connections are common in studios and live sound because they remove noise picked up along the cable. Pro-Ject says phono cartridges are balanced signal transducers by nature, and that a standard RCA phono connection throws away half of the usable signal.
The X2 B has mini XLR and RCA outputs, and comes with Pro-Ject's semi-balanced Connect it Phono E RCA cable. For the full True Balanced setup you need a balanced mini XLR to mini XLR cable (sold separately) and a balanced phono stage such as the Phono Box S3 B or DS3 B.

Ortofon Quintet Red cartridge
Pro-Ject says the True Balanced connection needs a moving-coil (MC) cartridge, because the internal wiring of an MM cartridge cannot use the whole balanced signal. This X2 B comes with the Ortofon Quintet Red MC cartridge, pre-adjusted at the factory.
Pro-Ject describes the Quintet Red as an all-purpose cartridge with open, dynamic sound and a slight touch of warmth. Ortofon lists a 0.5 mV output and an elliptical stylus.
Tonearm and adjustment
The tonearm is 9" long, a one-piece carbon/aluminium sandwich with no detachable headshell. Pro-Ject says the carbon layer adds rigidity while the aluminium inside damps the tube. It has an effective mass of 13.5 g and a TPE-damped counterweight.
The tonearm base allows azimuth and VTA (vertical tracking angle) adjustment. Pro-Ject says the higher mass suits low and moderate compliance MC cartridges.
Platter, motor and chassis
The platter is 30 mm thick, 2 kg acrylic. The motor chassis is suspended on a tuned TPE belt to decouple it from the main plinth. Speed changes at the push of a button between 33 and 45 RPM. Pro-Ject says you can fit the supplied round belt to switch between 45 and 78 RPM instead.
The chassis is 50 mm thick MDF with eight layers of paint or a real-wood veneer, on three height-adjustable, vibration-absorbing aluminium feet. A dust cover and felt mat are included.
Finish
Pro-Ject offers the X2 B in high-gloss and satin colours and real-wood veneer. This listing is White.

Is it right for you?
A great fit if you…
- Want a balanced phono connection between turntable and phono stage
- Plan to use a moving-coil cartridge
- Want azimuth and VTA adjustment
- Want a heavy MDF turntable with an acrylic platter
Worth knowing
- The cable supplied is semi-balanced. For True Balanced you need a separate balanced mini XLR cable and a balanced phono stage
- The Quintet Red is a moving-coil cartridge, so it can use the True Balanced connection
- The turntable is 460 mm wide and weighs 10 kg
Build your system
For the balanced connection you need a balanced phono stage. Pro-Ject names the Phono Box S3 B and Phono Box DS3 B.
- Phono stage: Pro-Ject's balanced Phono Box S3 B or Phono Box DS3 B, along with a mini XLR cable, completes the True Balanced setup
- Amplifier: Connect to an integrated amplifier from our stereo amplifier range
- Speakers: Add a pair of bookshelf speakers or floor-standing speakers
- More turntables: Browse our turntable range
Specifications
Turntable
| Drive principle | Belt drive, electronic speed change |
|---|---|
| Speeds | 33, 45 and 78 RPM |
| Speed variance | 33: 0.25%, 45: 0.20% |
| Wow and flutter | 33: 0.12%, 45: 0.10% |
| Signal to noise | 70 dB |
| Platter | 30 mm thick, 2 kg acrylic |
| Main bearing | Stainless steel / brass |
Tonearm
| Type | 9" carbon/aluminium sandwich |
|---|---|
| Effective length | 230 mm |
| Effective mass | 13.5 g |
| Overhang | 18 mm |
| Tracking force range | 0 - 30 mN |
| Adjustment | Azimuth and VTA |
Cartridge (Ortofon Quintet Red)
| Type | Moving coil |
|---|---|
| Output voltage (1 kHz, 5 cm/s) | 0.5 mV |
| Stylus | Elliptical, r/R 8/18 µm |
| Recommended tracking force | 2.3 g (range 2.1 - 2.5 g) |
| Recommended load impedance | Over 20 ohms |
| Weight | 9 g |
Connections and power
| Outputs | RCA phono and 5-pin mini XLR |
|---|---|
| Power supply | 15V DC / 0.8A |
| Power consumption | 4.5 W maximum, 0.3 W standby |
| Dimensions (W × H × D) | 460 × 150 × 340 mm |
| Weight | 10 kg |
Specifications from Pro-Ject Audio Systems (X2 B product page and product information sheet) and Ortofon (MC Quintet Red page), checked November 2026.
What is in the box
- Pro-Ject X2 B turntable
- Connect it Phono E RCA cable (semi-balanced)
- Dust cover
- Felt mat
- Power supply
- Round belt for 78 RPM
Questions people ask
What is the True Balanced connection?
It is Pro-Ject's balanced connection between turntable and phono stage. Pro-Ject says it removes noise picked up in the cable and uses the whole cartridge signal.
Do I need a special cable?
The X2 B includes a semi-balanced RCA cable. For True Balanced you need a balanced mini XLR to mini XLR cable, sold separately, and a balanced phono stage.
Does it need a moving-coil cartridge?
Pro-Ject says to use the full balanced signal you need an MC cartridge, as the internal wiring of MM cartridges prevents this.
Can it play 78 RPM records?
Pro-Ject says you can fit the supplied round belt to switch between 45 and 78 RPM, and change to a shellac-capable cartridge.
Can I adjust azimuth and VTA?
Yes. Pro-Ject says the X2 B has fully adjustable azimuth and VTA.