True wireless earbuds from Technics with 10 mm aluminium alloy diaphragm drivers, dual hybrid noise cancelling, JustMyVoice Technology with 8 microphones, Bluetooth 5.3 with LDAC and Qi wireless charging. Technics lists up to 7 hours of playback with ANC on (AAC), and 24 hours with the charging case. Available in Black, Midnight Blue and Silver.
Technics says the AZ80 delivers detailed hi-fi sound with powerful bass, from large 10 mm free-edge aluminium alloy diaphragms, an acoustic control chamber and a harmoniser.
Technics on the EAH-AZ80
Why you will love it
10 mm drivers, acoustic chamber and harmoniser
Technics says the large 10 mm free-edge aluminium alloy diaphragms give an enhanced, low-distortion bass response. It says the acoustic control chamber gives a natural mid-range with powerful bass, and the harmoniser adds expansive sound with less distortion.
Technics lists a frequency response of 20 Hz to 40 kHz (LDAC at 96 kHz/990 kbps) and says the earbuds support LDAC high-res wireless audio, delivered at 96 kHz/24-bit over Bluetooth to a compatible device. Codecs listed are SBC, AAC and LDAC.

Dual hybrid noise cancelling and JustMyVoice
Technics describes dual hybrid active noise cancelling using feedforward and feedback microphones with analogue and digital processing. It describes the performance as category-leading, based on its own research using JEITA guidelines for true wireless noise cancelling headphones as of March 2023.
JustMyVoice Technology uses 8 microphones and wind noise reduction to isolate speech from background noise on calls. Technics notes performance may be affected by external factors. Natural Ambient mode lets you choose how much background sound you hear, and Attention mode focuses on speech.
Multipoint, single-earbud use and app
Multipoint connects up to 3 devices, such as a computer, smartphone and tablet. Technics notes there is no LDAC playback with 3 devices connected.
You can use one earbud at a time, or charge one while using the other. Touch sensors can be customised in the Technics Audio Connect app.

Battery and Qi charging
With AAC, Technics lists approx. 7 hours of playback with ANC on and 7.5 hours with ANC off, and approx. 24 hours with ANC on including the charging case. With LDAC the figures are approx. 4.5 hours and 16 hours with ANC on.
A 15 minute quick charge gives approx. 70 minutes of playback (AAC, ANC on). The case charges by USB-C or by Qi wireless charging. Technics notes a Qi charger is sold separately.
Fit, finish and materials
Technics describes a low-profile design with a natural concha fit, shaped to sit in the concha groove just above the ear opening. It also describes aluminium trim with engraved Technics logos.
The earbuds are IPX4 equivalent (earphones only, not the charging case). Seven earpiece sizes are supplied. Technics says the earbuds and charging case use the plant-based bioplastic DURABIO.
Is it right for you?
A great fit if you…
- Want noise-cancelling true wireless earbuds with large 10 mm drivers
- Use a phone that supports AAC or LDAC
- Switch between a computer, phone and tablet using multipoint
- Want wireless Qi charging for the case (with your own Qi charger)
Worth knowing
- LDAC playback is not possible with 3 devices connected, and battery life is shorter with LDAC (about 4.5 hours with ANC on)
- The earbuds are IPX4 equivalent. The charging case is not
- A Qi charger is not included
- Three finishes are available: Black, Silver and Blue
Build your system
Technics makes other true wireless earbuds if you want to compare.
- Compare: See the Technics EAH-AZ40M2 earbuds
- Compare: See the Technics EAH-AZ60M2 earbuds
- Compare: See the Technics EAH-AZ100 earbuds
- More headphones: Browse headphones
Specifications
Audio and wireless
| Driver unit | 10 mm |
|---|---|
| Frequency response | 20 Hz - 40 kHz (LDAC 96 kHz/990 kbps) |
| Microphone | Monaural, MEMS |
| Bluetooth | 5.3; operating distance up to 10 m |
| Profiles | A2DP, AVRCP, HSP, HFP |
| Codecs | SBC, AAC, LDAC |
| Multipoint | Yes, up to 3 devices at a time |
| Multi-pairing | Yes, up to 10 devices |
| Noise cancelling | Dual hybrid |
| Water resistance | IPX4 equivalent (earphones only) |
Battery and charging
| Playback (AAC), earbuds | Approx. 7.0 hours ANC on; approx. 7.5 hours ANC off |
|---|---|
| Playback (AAC), with case | Approx. 24 hours ANC on; approx. 25 hours ANC off |
| Playback (LDAC), earbuds | Approx. 4.5 hours ANC on; approx. 5.0 hours ANC off |
| Playback (LDAC), with case | Approx. 16 hours ANC on; approx. 17 hours ANC off |
| Charging time | Earbuds approx. 2.0 hours; charging case by USB approx. 2.5 hours; case by Qi approx. 3.5 hours (certified Qi charger) |
| Quick charge | 15 minutes, AAC: earbuds approx. 70 minutes (ANC on) |
| Standby time | Approx. 9 hours (ANC on); approx. 15 hours (ANC off, auto power off does not work) |
Physical
| Earbud dimensions | Approx. 22 x 27 x 24 mm (W x H x D, medium earpiece) |
|---|---|
| Charging case dimensions | Approx. 69 x 36 x 29 mm |
| Weight | Earbuds approx. 7 g each; charging case approx. 50 g |
| Accessories | USB charging cord approx. 0.2 m (USB-C to USB-C); earpieces XS1, XS2, S1, S2, M, L, XL (M attached) |
Specifications from Technics' Australian EAH-AZ80 page, checked November 2026.
What is in the box
- EAH-AZ80 earbuds
- Charging case
- Earpieces: XS1, XS2, S1, S2, M, L and XL (M attached)
- USB-C to USB-C charging cord, approx. 0.2 m
Questions people ask
How long does the battery last?
With AAC, Technics lists approx. 7 hours with ANC on, or approx. 24 hours including the charging case. With LDAC it lists approx. 4.5 hours, or approx. 16 hours with the case, with ANC on.
Can I charge the case wirelessly?
Yes. Technics lists Qi wireless charging for the case. A Qi charger is sold separately.
How many devices can I connect?
Multipoint connects up to 3 devices at a time. LDAC playback is not available with 3 devices.
Which codecs are supported?
SBC, AAC and LDAC, over Bluetooth 5.3.
Are they water resistant?
The earbuds are IPX4 equivalent. The charging case is not.
What are the drivers made of?
Technics says the 10 mm drivers use free-edge aluminium alloy diaphragms.