The midsize floorstanding speaker in JBL's Stage 2 range. It has dual 6.5-inch woofers and a 1-inch aluminium dome tweeter in a 2.5-way design, and JBL says it is compatible with the 240H Atmos module.
JBL lists the 260F with a shipping unit of Each, so it is a single speaker. Order two for a stereo pair.
Why you will love it
Ready for Dolby Atmos
JBL says the 260F mates with the 240H to add Dolby Atmos to your system. Dedicated Atmos 5-way binding posts at the bottom and top of the speaker hide the wiring. If the Atmos terminals are not used, JBL supplies a cover.

2.5-way design with HDI horn
The top woofer crosses over just below the tweeter, while the other woofer crosses over lower. JBL says this gives a dynamic midrange while both woofers still extend deep.
The 1-inch anodised aluminium dome tweeter sits in JBL's patented HDI waveguide, which JBL says improves directivity and reduces diffraction.
Flared ports and Stage 2 details
Dual racetrack flared ports fire from the rear. JBL says the flared shape lowers air velocity to avoid chuffing.
Other details JBL lists include 5-way binding posts, magnetically attached grilles and a plinth with floor spikes.

Is it right for you?
A great fit if you…
- Want a midsize floorstanding speaker for stereo or home theatre
- Plan to add Dolby Atmos height modules later
- Are building a Stage 2 system
Worth knowing
- The 260F is listed by JBL as Each, so buy two for a stereo pair
- The 240H Atmos module is a separate product, and Atmos needs a compatible AV receiver
Build your system
Pair the 260F with other JBL Stage 2 models from our range.
- Atmos height: JBL Stage 2 240H sits on top and connects to the Atmos posts
- Centre: JBL Stage 2 245C centre speaker
- Bigger tower: JBL Stage 2 280F
- Bookshelf: JBL Stage 2 250B bookshelf speakers
- Subwoofer: JBL Stage 2 200P subwoofer or JBL Stage 2 220P subwoofer
- Receiver: Drive it with an AV receiver or stereo amplifier
Specifications
Drivers
| Woofers | Dual 6.5-inch (165mm) polycellulose ribbed cone |
|---|---|
| Tweeter | 1-inch (25mm) anodised aluminium dome |
| Waveguide | Next Generation HDI |
| Enclosure | Bass reflex via dual flared racetrack rear-firing ports |
Performance
| Frequency response | 40Hz – 25kHz ±6dB |
|---|---|
| Sensitivity | 90dB at 1m, 2.83V |
| Nominal impedance | 6 ohms |
| Crossover | 1.3kHz / 1.7kHz |
| Recommended amplifier power | 20 – 225W |
Design
| Finishes | Espresso or Latte woodgrain with solid colour front baffle and matching grille (Todds names: Anthracite/Espresso, White/Latte) |
|---|---|
| Dimensions (H × W × D) | 1036 × 310 × 362 mm |
| Weight | 19.5 kg |
| Supplied as | Each |
Specifications from JBL's product page and spec sheet, checked November 2026. JBL's published dimensions without the base differ between its documents, so only the main dimensions are shown.
What is in the box
- 260F speaker
- Plinth
- 4 x mounting screws
- 4 x floor spikes
- Tool
- Speaker grille
- Safety sheet
- Quick-start guide
Questions people ask
Is the 260F sold as a pair?
JBL lists the 260F with a shipping unit of Each, so it is a single speaker.
Can I add Dolby Atmos?
JBL says the 260F is compatible with the 240H Atmos module and has dedicated Atmos binding posts at the top and bottom.
What amplifier power does JBL recommend?
JBL recommends 20 to 225 watts.
Does it have ports?
Yes. JBL lists bass reflex tuning via dual flared racetrack rear-firing ports.