BackBack

Yamaha MX-A5200 11.2 Channel AV Power Amp

$3,899.00

Exhilarating home cinema   AVENTAGE Separate Components AVENTAGE Separate Components represent the pinnacle in exhilarating home entertainment. In pursuit of the ultimate in home cinema, Yamaha establishes a new benchmark in performance and innovation. Introducing the CX-A5200 pre-amplifier and MX-A5200 power amplifier.   Power and Presence The MX-A5200 offers 11 x discrete channels of amplification with flexible configuration options -...

Description

Exhilarating home cinema

 

AVENTAGE Separate Components

AVENTAGE Separate Components represent the pinnacle in exhilarating home entertainment.

In pursuit of the ultimate in home cinema, Yamaha establishes a new benchmark in performance and innovation.

Introducing the CX-A5200 pre-amplifier and MX-A5200 power amplifier.

 

Power and Presence

The MX-A5200 offers 11 x discrete channels of amplification with flexible configuration options - delivering an impressive combination of power and quality.

Enjoy the flexibility of a multi-zone system or immerse yourself in exhilarating surround sound using any combination of 11-channels.

 

Ultimate Performance with BTL

To further enhance power capacity, the MX-A5200 supports Bridge Tied Load (BTL) configuration for the front 2 channels. This allows for a major improvement to the front speaker performance.

 

Uncompromising Design

As part of its uncompromising design, the MX-A5200 boasts a specially designed chassis to maximise rigidity and eliminate the effects of vibration.

The MX-A5200 employs a double bottom construction consisting of vibration control plates made of 1.6 mm steel - echoing that of the legendary Z11 AV receiver.

In order to support the heavy heat sinks and other components, a left-right independent construction strengthened by a rigid-frame structure is utilised. The bottom frame reduces the transmission of vibration produced by the large power supply transformer and heat sinks.

The MX-A5200 also incorporates a heavy insulator that blocks external vibration.

 

Perfectly Symmetrical

Precisely planned, circuit-routed and designed with a symmetrical power amplifier layout, the MX-A5200 achieves ideal channel separation with left and right sides being both physically and electrically isolated.

The design also greatly improves signal-to-noise ratio and achieves an expansive sound stage.

 

Effortless Performance

The MX-A5200 utilises a high-output, large toroidal transformer combined with 2 specially developed high-capacity block capacitors to deliver massive power with generous headroom.

Also, energy loss is minimised and ensures effortless reproduction of sound sources.

 

Superior Connection

The rear of the MX-A52000 features high-quality, gold-plated terminals that are compatible with Y plugs (spade connectors) for optimal connections with speakers.

 

Heavy-duty Bottom Plate

Stabilising the chassis is the key to enhanced performance and deep, sinking sound. The MX-A5200 achieves this by employing a thick bottom plate which acts to steady the entire structure and achieve optimal sound.

 

Balanced XLR Connections

When connecting AV components, electrical noise can be introduced - a result of the connections between them and also from other sources of external noise.

To combat this inherent issue, the MX-A5200 utilizes balanced connections for all 11-channels - the same type found in professional audio applications.

Additionally, the alternative RCA unbalanced connection uses a ground sensing transmission method that achieves simple balanced transmission.

 

Amplifier Section Channel 11
Rated Output Power (1kHz, 1ch driven) 290 W (4 ohm, 0.9% THD [European Model] ), 230 W (6 ohm, 0.9% THD), 190 W (8 ohm, 0.9% THD)
Rated Output Power (1kHz, 2ch driven) 170 W (8 ohm, 0.9% THD)
Rated Output Power (1kHz, 2ch driven, bridged connection) 240 W (8 ohm, 0.9% THD)
Rated Output Power (20Hz-20kHz, 2ch driven) 170 W (6 ohm, 0.06% THD), 150 W (8 ohm, 0.06% THD)
Rated Output Power (20Hz-20kHz, 2ch driven, bridged connection) 200 W (8 ohm, 0.06% THD)
Maximum Effective Output Power (1kHz, 1ch driven) (JEITA) 280 W (6 ohm, 10% THD), 230 W (8 ohm, 10% THD)
Dynamic Power per Channel (8/6/4/2 ohms) 190 / 250 / 350 / 500 W
Audio Features A.R.T. Wedge Yes
BTL connection Yes
Bi-amp capability Yes
Digital ToP-ART / High Current Amplification Three-stage Darlington Power Stage
Current Feedback Amplifier Circuit Yes
Connectivity Analog Audio Input/Output XLR Balance: 11 / 0, RCA Unbalance: 11 / 0
Zone Control +12V Trigger Output Out:1, Trigger in / Through: 1 / 1
General Standby Power Consumption (IR only) 0.1 W (typical)
Auto Power Standby Yes (ON / OFF switch)
Dimensions (W x H x D) 435 x 211 x 463.5 mm; 17-1/8” x 8-1/4” x 18-1/8”
Weight 26.4 kg; 58.2 lbs.
Power Consumption 650 W
Delivery

We provide FREE shipping to the East Coast of Aus. Online orders are now dispatched every Tuesday & Friday.

To avoid disappointment, make sure to get your orders in before 10am on Tuesdays & Fridays, otherwise they won't be dispatched until the following Tuesday or Friday.

We partner with reputable courier services and you will receive tracking information via email when your goods are booked for delivery.

Alternatively we have a free in store pickup option available - please just give us a call to double check the stock is ready before coming.

Installation

At Todds HiFi, we can install the products we sell. We have a dedicated team of installers that can assist you with whatever you may require.

Click here to learn more.

Zip Pay

SHOP TODAY, INTEREST FREE & PAY LATER WITH ZIP

We are excited to now offer our customers interest free payment via zip pay.

Orders less than $3000 qualify for 6 months interest free.

Orders over $3000 qualify for 12 months interest free.

Click here or chat to us for more info.